ICE-Trade Multiple Strip Winder

ICE-Trade Multiple Strip Winder

The ICE-Trade Multiple Strip Winder winds the rubber or PU strips after cutting
out of the sheet by the Slitting Machine. Those strips are used for skirting in the conveyor installation.
The Multiple Strip Winder is placed direct behind the Slitting Table and winds all the cut strips in one go.
To enable getting the axle out of the individual strips are wind on carton cores.
The Multiple Strip Winder features an expandable winding axle, produced from either aluminum or steel, depending the diameter and the max. roll weight of the rubber or PU sheet. This axle works with compressed air to expand the tips.
The support of the winding axle is with brass bearings or with the ICE-Trade Safety Chucks. For more info : www.ice-trade.com